Atosa Bottom-Mount Two-Door Reach-In Refrigerator 46.8 cu ft - MBF8507GR

The Atosa MBF8507GR is a two-section, bottom-mount commercial reach-in refrigerator built for high-volume restaurant and foodservice operations that need reliable, accessible cold storage on the line or in a prep area. At 46.77 cu ft across two independently locked solid doors, it holds a substantial amount of product without requiring a dedicated walk-in.

• Two-section commercial reach-in refrigerator with bottom-mount self-contained refrigeration, suited for hot cooking line environments where a top-mount compressor would be exposed to overhead heat; compressor placement at the base also simplifies routine service and coil cleaning
• Stainless steel interior and exterior construction with a galvanized steel back; six epoxy-coated wire shelves (three per section, part number W0402387) resist rust and corrosion in humid kitchen environments
• 46.77 cu ft capacity in an exterior footprint of 54.4" W x 31.7" D x 83.1" H; ships with four 4" pre-installed casters for floor-level mobility and repositioning; interior width is 49-5/8"
• Runs on standard 115V/60Hz/1-phase power at 3.2 amps with a NEMA 5-15P plug; no dedicated circuit or special wiring required for most commercial kitchen installations
• Air defrost with automatic evaporation eliminates manual defrost tasks; down-duct refrigeration distributes air evenly throughout the cabinet; solid swing doors self-close below 90 degrees and stay open past 90 degrees for hands-free loading
• Dixell digital controller maintains 33°F to 40°F; recessed door handles reduce snagging in tight kitchen corridors; standard door locks on both sections secure contents during off-hours; unit weight is 452 lbs gross
• cETLus certified for electrical safety in the US and Canada
• ETL-Sanitation certified for commercial foodservice sanitation standards
• ENERGY STAR certified; R290 hydrocarbon refrigerant with 1/5 HP variable-capacity compressor

Dimensions: 54.4" W x 31.7" D x 83.1" H