T&S Brass Wall Mount Chrome Brass Pot Filler NSF 18" Double Joint - B-0580

The T&S Brass B-0580 is a commercial wall mount pot filler faucet built for restaurant kitchens and foodservice operations that need fast, high-volume filling of stock pots and kettles directly at the range or prep station. With a 12.3 GPM flow rate and an 18" double joint swing nozzle, it positions where you need it and delivers water fast.

• Wall mount pot filler faucet designed for commercial use at ranges, kettle stations, and pot sinks in professional kitchen environments.
• Chrome-plated brass body construction with a polished chrome finish; rated to 125 PSI and up to 140 degrees F water temperature.
• 18" (457mm) double-jointed swing nozzle with 18" spout reach; faucet height is 7" and faucet width is 2"; overall installed footprint is approximately 19.75" D x 7.05" H x 2.19" W.
• Single-hole wall mount installation; connects via 1/2" NPT female inlet with an included adjustable flange; note that an in-line stop valve should be installed separately.
• Flow control is handled at the nozzle tip via an insulated on/off volume control grip, eliminating the need for a separate body-mounted valve and allowing operators to start and stop flow close to the pot.
• Made in the USA; low lead compliant; carries cCSAus certification.

• Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9, and NSF 372.

Dimensions: Spout Length: 18" | Faucet Height: 7" | Faucet Width: 2" | Overall: 19.75" D x 7.05" H x 2.19" W