Atosa Stainless Steel Horizontal Bottle Cooler 80.5" - 3 Lids MBC80GR

The Atosa MBC80GR is an 80-1/2" wide horizontal bottle cooler for bars, restaurants and other beverage service areas that need a lot of chilled bottle and can storage behind the bar. It holds 21.2 cu. ft. in three sections, each with a locking stainless steel sliding lid, and its electronic controller keeps it between 35°F and 38°F. The self-contained refrigeration uses a 1/5 HP Embraco compressor with R290 refrigerant and runs on 115V, drawing 2.8 A through a NEMA 5-15P plug. It measures 80-1/2" wide, 26-3/4" deep and 38-1/2" high, with stainless steel inside and out and pre-installed casters. East Bay Restaurant Supply ships this model with free shipping.

Key features

• 21.2 cu. ft. of refrigerated storage, loaded from the top
• Three easy-glide stainless steel sliding lids with handles
• Lid locks come standard
• Electronic temperature controller holds 35°F to 38°F
• Heavy-duty Embraco compressor with R290 hydrocarbon refrigerant
• Slide-out compressor assembly for easier service
• Stainless steel exterior and interior
• Five wire dividers come standard to organize product
• Built-in bottle opener and cap catcher
• Pre-installed 2" casters
• Plugs into a standard 115V outlet (NEMA 5-15P)

Atosa MBC80GR specifications

Brand	Atosa
Model number	MBC80GR
Product type	Horizontal bottle cooler (refrigerated)
Sections / lids	3 sections, 3 locking stainless steel sliding lids
Capacity	21.2 cu. ft.
Exterior width	80-1/2"
Exterior depth	26-3/4"
Exterior height (overall)	38-1/2"
Temperature range	35°F to 38°F
Temperature control	Electronic controller
Refrigeration	Self-contained, side-mounted, slide-out compressor assembly
Compressor	Embraco, 1/5 HP
Refrigerant	R290
Electrical	115 V / 60 Hz / 1 phase, 2.8 A
Plug	NEMA 5-15P
Dividers	5 wire dividers
Exterior material	Stainless steel
Interior material	Stainless steel
Included accessories	Bottle opener and cap catcher
Casters	2", pre-installed
Net weight	251 lb
Shipping weight	344 lb
Certifications	cETLus, ETL Sanitation
Warranty	2 years parts and labor, plus 3 more years on the sealed compressor (5 years total)

Frequently asked questions

What outlet does the Atosa MBC80GR need?

It needs a standard 115V, 15 A grounded outlet (NEMA 5-15R) for its NEMA 5-15P plug. The unit runs on 115 V / 60 Hz / single phase and draws 2.8 A. Plug it straight into the wall. Atosa's warranty does not cover damage caused by extension cords, low voltage or voltage drops.

What temperature does it hold?

It is a refrigerator, not a freezer, and its electronic controller holds 35°F to 38°F for bottled and canned drinks.

Will it fit through a standard doorway?

Yes, if you move it lengthwise. At 26-3/4" deep and 38-1/2" high, it clears a 36" doorway with room to spare. The 80-1/2" length goes along the hallway, not across the opening.

How much does it hold?

It holds 21.2 cu. ft. across three top-loading sections. Five wire dividers come standard so you can separate brands or product types.

What certifications does it have?

It is cETLus listed and ETL Sanitation listed. cETLus means it was tested to US and Canadian electrical safety standards. ETL Sanitation means it was evaluated for cleanability and sanitation in commercial food service, which health inspectors look for.

What warranty comes with it?

Atosa covers parts and labor for 2 years and the sealed compressor for 3 more years, up to 5 years total. Labor coverage pays standard straight-time rates and reasonable travel time. The extra compressor years cover only the compressor's sealed parts. They do not cover the cabinet, temperature control, refrigerant, metering device, motor starting equipment or fan assembly. Damage from power failure, extension cords, low voltage or voltage drops is not covered. Claims go directly to Atosa with the model number, serial number, proof of purchase and installation date.

How does it compare with other Atosa bottle coolers?

The MBC80GR is the largest of the current Atosa MBC models, with three lids and a 1/5 HP compressor. The MBC65GR is 64-3/4" wide with 16.4 cu. ft. and two lids. The MBC50GR is 49-3/8" wide with 11.7 cu. ft. and two lids. The MBC36GR (7.7 cu. ft.) and MBC24GR (4 cu. ft.) each have one lid. The four smaller models use a 1/7 HP compressor rated at 2.3 A.

Is it easy to clean and service?

Yes. The interior and exterior are stainless steel, so they wipe down easily, and the casters let you roll the unit out to clean behind it. The compressor assembly slides out for service.

Does it ship free, and how is it delivered?

Yes, this model ships free. It ships on a pallet by freight truck. A lift gate fee applies to large items like this one if you don't have a loading dock and is calculated at checkout.