Atosa Insulated Heated Holding Cabinet Stainless Steel - 12 Pan - ATWC-9-P

The Atosa ATWC-9-P is a mobile, insulated heated holding cabinet from the CookRite Insulated Economy line. It is built for restaurants, caterers, cafeterias and banquet kitchens that need to hold cooked food hot between production and service. The cabinet holds twelve 18" x 26" sheet pans and measures 25-1/10" wide, 30-7/10" deep and 42-7/10" high. It heats from 80°F to 220°F and runs on 120 V, 1580 W through a NEMA 5-15P plug. The interior and exterior are stainless steel, the cabinet body is fully foam insulated, and the front has a clear polycarbonate door. East Bay Restaurant Supply ships this model with free shipping.

Key features

• Holds twelve 18" x 26" full-size sheet pans on integrated slides.
• Adjustable heating from 80°F to 220°F, set by dial control.
• LED display shows cabinet temperature.
• Humidifying water tray helps keep held food from drying out.
• Clear polycarbonate door lets staff see the product without opening it, and it stays open at 90° for loading.
• Fully insulated cabinet with foamed insulation to cut heat loss.
• Stainless steel interior and exterior.
• Removable control drawer and integrated slides for cleaning.
• Four casters come standard: two locking, two swivel.
• Plugs into a standard 120 V outlet with a 6 ft cord and NEMA 5-15P plug.

Atosa ATWC-9-P specifications

Brand	Atosa
Model number	ATWC-9-P
Product type	Insulated warming and holding cabinet, mobile
Product line	CookRite Insulated Economy Warming and Holding Cabinets
Sections / doors	1 section, 1 transparent polycarbonate door with 90° stay-open feature
Pan capacity	12 sheet pans, 18" x 26"
Exterior width	25-1/10" (25.1")
Exterior depth	30-7/10" (30.7")
Exterior height (overall)	42-7/10" (42.7")
Temperature range	80°F to 220°F
Controls	Dial thermostat with LED temperature display
Humidity	Humidifying water tray
Electrical	120 V / 60 Hz / 1 phase, 13.2 A
Power	1580 W (1.58 kW)
Plug	NEMA 5-15P
Cord length	6 ft
Exterior material	Stainless steel
Interior material	Stainless steel, integrated slides, removable control drawer
Insulation	Fully insulated, foamed insulation
Casters	4 casters, 2 locking and 2 swivel
Gross weight	168 lb
Certifications	cETLus, ETL Sanitation (NSF/ANSI Standard 4)
Warranty	1 year parts and labor

Frequently asked questions

What outlet does the Atosa ATWC-9-P need?

It needs a standard 120 V, 60 Hz, single-phase NEMA 5-15R outlet, which matches its NEMA 5-15P plug. The cord is 6 ft long. The unit is rated at 1580 W and draws 13.2 A, which is close to the limit of a 15 A circuit, so it should not share that circuit with other heavy loads.

Will the ATWC-9-P fit through a standard doorway?

Yes. At 30-7/10" deep and 25-1/10" wide it passes through a 36" doorway, and at 42-7/10" high it is far below an 80" door opening.

What temperature does it hold, and is it a proofer?

It is a heated holding cabinet with an adjustable range of 80°F to 220°F, used to keep cooked food hot. It is not a refrigerator. The water tray adds humidity to keep food from drying out. Kitchens that need a dedicated proofing mode with adjustable humidity levels should look at Atosa's ATHC series.

How much does the ATWC-9-P hold?

It holds twelve 18" x 26" full-size sheet pans on integrated slides inside a single compartment.

What certifications does it have?

It carries cETLus and ETL Sanitation listings. cETLus means it has been tested to North American electrical safety standards for the US and Canada. ETL Sanitation means it conforms to NSF/ANSI Standard 4 for commercial cooking and hot food holding equipment, which health inspectors look for in commercial kitchens.

What warranty comes with the ATWC-9-P?

Atosa covers it for 1 year of parts and labor against defects in materials and workmanship, starting from the date the unit ships from Atosa. Labor is covered at standard straight-time rates plus reasonable travel time, and claims go directly to Atosa with the model number, serial number and proof of purchase. The warranty covers only the original purchaser and cannot be transferred. It excludes damage from alteration, neglect, abuse, misuse, accident, transit or installation damage, fire and acts of God.

How does the ATWC-9-P differ from the ATWC-18-P and ATHC-9P?

The ATWC-18-P is the full-height version of the same cabinet. It holds twenty-four 18" x 26" pans, stands 69-7/10" high and has the same 25-1/10" width and 1580 W rating. The ATHC-9P is the same width but holds nine 18" x 26" pans with 1.3" clearance between slides, and it heats from 90°F to 220°F.

Does it ship free, and how is it delivered?

Yes, this model ships free. It ships on a pallet by freight truck. A lift gate fee applies to large items like this one if you don't have a loading dock and is calculated at checkout.