Atosa Stainless Steel Worktop Refrigerator 44" Side Mount - 9.7 Cu. Ft. - MGF44GR

The Atosa MGF44GR is a 44" one-door worktop refrigerator with a side-mounted compressor. It is built for restaurants, delis, cafes and commissaries that need refrigerated storage and a stainless steel prep surface in one unit. It holds 9.7 cu. ft. and measures 44" wide by 34" deep by 40-7/10" high. An electronic controller keeps it between 35°F and 38°F. It runs on 115V at 2.3 A with a 1/7+ HP compressor and R290 refrigerant, and has a stainless steel interior and exterior with a 4" foamed-in-place backsplash. East Bay Restaurant Supply ships this model with free shipping.

Key features

• Self-contained, side-mounted compressor running on R290 hydrocarbon refrigerant
• Electronic temperature controller holds 35°F to 38°F
• Stainless steel worktop with a 4" foamed-in-place backsplash
• Stainless steel exterior and interior
• One solid hinged door that closes on its own and has a stay-open feature
• Recessed door handle with nothing sticking out into the aisle
• Magnetic door gasket for a tight seal without latches
• Two pre-installed shelves. Extra shelves are part number W0402572 and come with 4 shelf clips each
• Four pre-installed 5" swivel casters with bumpers. Two of them lock, and each caster is rated for over 150 lb
• Plugs into a standard 115V outlet with a NEMA 5-15P plug and draws 2.3 A

Atosa MGF44GR specifications

Brand	Atosa
Model number	MGF44GR
Product type	Worktop refrigerator with backsplash, side-mount compressor
Sections / doors	1 section, 1 solid hinged door
Door hinge	Left
Compressor location	Side mounted (right), self-contained
Capacity	9.7 cu. ft.
Exterior width	44"
Exterior depth	34"
Exterior height	40-7/10" (40.7")
Backsplash height	4"
Temperature range	35°F to 38°F
Temperature control	Electronic controller
Refrigerant	R290
Compressor HP	1/7+ HP
Electrical	115 V / 60 Hz / 1 phase, 2.3 A
Plug	NEMA 5-15P
Shelves	2 included, extra shelf part number W0402572
Exterior material	Stainless steel
Interior material	Stainless steel
Insulation	Foamed-in-place (backsplash)
Casters	4 swivel casters, 5", 2 locking, rated over 150 lb each
Net weight	234 lb
Shipping weight	298 lb
Certifications	cETLus, ETL-Sanitation
Warranty	2 years parts and labor, plus 3 more years on compressor parts (5 years total)

Frequently asked questions

What outlet does the Atosa MGF44GR need?

It needs a standard 115V, 15 A NEMA 5-15R outlet, because it comes with a NEMA 5-15P plug. It runs on 115 V, 60 Hz, single phase and draws 2.3 A.

Is the MGF44GR a refrigerator or a freezer, and what temperature does it hold?

It is a refrigerator. Its electronic controller holds 35°F to 38°F. If you need a freezer, look at Atosa's worktop freezer line, such as the MGF8412GR, which holds -8°F to 0°F.

Will it fit through a standard doorway?

Yes, in most cases. It is 34" deep, which is less than a 36" doorway, and 40.7" high, which is well under an 80" door opening. Roll it through depth-first. Measure the actual clear opening with the door open, since frames and hinges take up some width.

How much does it hold?

It holds 9.7 cu. ft. in one section with two shelves included. If you need more shelf space, you can add shelves (part number W0402572).

What certifications does it have?

It is cETLus and ETL-Sanitation listed. cETLus means it was tested to North American electrical safety standards for use in the US and Canada. ETL-Sanitation means it was tested to food equipment sanitation standards, which health inspectors generally look for in commercial kitchens.

What warranty comes with the MGF44GR?

Atosa covers parts and labor for 2 years. The 2 years start at the original installation date, or run 27 months from the date it shipped from Atosa, whichever ends first. Labor covers standard straight-time rates and reasonable travel time. Atosa also covers the sealed compressor for 3 more years, up to 5 years from installation. That extra coverage is for the sealed compressor parts only. It does not cover the cabinet, paint, temperature control, refrigerant, metering device, motor starting equipment or fan assembly. To make a claim, you need the model number, serial number, proof of purchase and installation date.

How does the MGF44GR differ from the Atosa MGF67GR?

The MGF67GR is the 67" two-door version. It holds 18.5 cu. ft., comes with 4 shelves, and uses a 1/5 HP compressor drawing 2.8 A. The MGF44GR is 44" wide with one door, 9.7 cu. ft., 2 shelves, a 1/7+ HP compressor and 2.3 A. Both are 34" deep and 40-7/10" high.

Is there a 44" Atosa prep table with the same capacity?

Yes. The Atosa MPF8201GR pizza prep table also holds 9.7 cu. ft. and runs on 115V, 2.3 A and 1/7 HP. It has a refrigerated pan rail instead of a flat worktop, so choose the MGF44GR if you want a plain prep surface with a backsplash.

Does it ship free, and how is it delivered?

Yes, this model ships free. It ships on a pallet by freight truck. A lift gate fee applies to large items like this one if you don't have a loading dock and is calculated at checkout.