Atosa Countertop Glass Door Merchandiser Cooler with Lighted Header 18" CTD-3S

The Atosa CTD-3S is a countertop glass door refrigerator merchandiser with a lighted header, built for cafes, delis, convenience stores and grab-and-go counters that sell packaged foods and bottled beverages at the point of sale. It measures 18-1/8" wide, 18-1/2" deep and 33" high, with 2.4 cu. ft. of storage on three removable PVC-coated wire shelves. Cold wall refrigeration with a mechanical controller holds 35°F to 38°F, and the 1/8 HP system runs on R600a refrigerant. It plugs into a standard 115V outlet through a 5' cord with a NEMA 5-15P plug and draws 1.5 A. East Bay Restaurant Supply ships this model with free shipping.

Key features

• Lighted header panel above the door for signage or branding
• Cold wall cooling, where the CTD-3 and CTD-5 use forced air
• Double pane glass door with recessed handle and a standard door lock
• Magnetic door gasket for a positive door seal
• LED interior lighting, which gives off less heat than fluorescent lamps
• Three pre-installed, removable PVC-coated wire shelves
• Foamed-in-place high density polyurethane insulation
• Black exterior cabinet and door frame with a white interior
• Certified for packaged foods and bottled beverages
• Leveling legs for setting the unit level on a counter

Atosa CTD-3S specifications

Brand	Atosa
Model number	CTD-3S
Product type	Countertop glass door refrigerator merchandiser with lighted header
Sections / doors	1 section, 1 hinged glass door
Door hinge	Right
Capacity	2.4 cu. ft.
Exterior width	18-1/8"
Exterior depth	18-1/2"
Exterior height	33"
Interior dimensions	14-1/2" wide x 13" deep x 22" high
Temperature range	35°F to 38°F
Cooling type	Cold wall
Temperature control	Mechanical controller
Refrigerant	R600a, 1.16 oz charge
Compressor	1/8 HP, rear mounted
Electrical	115 V / 60 Hz / 1 phase, 1.5 A
Plug	NEMA 5-15P
Cord length	5'
Shelves	3, removable PVC-coated wire
Door	Double pane glass, recessed handle, lock, magnetic gasket
Finish	Black exterior and door frame, white interior
Insulation	Foamed-in-place high density polyurethane
Lighting	LED interior, lighted header
Legs	Leveling legs
Net weight	64 lb
Shipping weight	70 lb
Certifications	cETLus (UL 471, CSA C22.2 No. 120), ETL Sanitation
Warranty	1 year parts and labor, plus 4 additional years on the sealed compressor (5 years total)

Frequently asked questions

What outlet does the Atosa CTD-3S need?

It needs a standard 115V, 60 Hz grounded outlet that accepts a NEMA 5-15P plug. It draws 1.5 A through a 5' cord. Plug it directly into the wall, because the warranty does not cover damage caused by extension cords, low voltage or voltage drops.

Is the CTD-3S a refrigerator or a freezer?

It is a refrigerator. It holds 35°F to 38°F with a mechanical controller and is certified for packaged foods and bottled beverages, not for frozen product or open food.

How much does the CTD-3S hold?

It has 2.4 cu. ft. of storage. The interior is 14-1/2" wide, 13" deep and 22" high, split by three removable wire shelves.

What certifications does the CTD-3S have?

It is cETLus listed to UL 471 and CSA C22.2 No. 120, the safety standards for commercial refrigerators in the US and Canada, and it carries ETL Sanitation certification. Health inspectors and landlords commonly ask for both electrical safety and sanitation listings on commercial refrigeration.

What warranty comes with the CTD-3S?

Atosa covers parts and labor for one year from the date the unit ships from Atosa, and covers the sealed compressor for four more years, up to five years in total. The compressor coverage applies only to the compressor's sealed parts, not to the cabinet, paint finish, temperature control, refrigerant, metering device, motor starting equipment, fan assembly or other electrical components. The warranty excludes food or product spoilage and other consequential losses, damage from power failure, extension cords or low voltage, and it cannot be transferred to anyone other than the original purchaser.

How does the CTD-3S differ from the CTD-3, CTD-3ST and CTD-5?

The CTD-3S has cold wall cooling and a lighted header, and its cabinet measures 18-1/8" wide x 18-1/2" deep x 33" high. The CTD-3 also holds 2.4 cu. ft. but uses forced air and a 1/10 HP compressor in a smaller 17-1/4" x 19-3/4" x 27-1/2" cabinet. The CTD-3ST is the same size as the CTD-3S but has an electronic temperature controller, two shelves and a 1.0 A draw. The CTD-5 is the larger forced air model, with 4.6 cu. ft., four shelves and a 21-1/4" x 22" x 33-3/4" cabinet.

Will the CTD-3S fit through a standard doorway?

Yes. At 18-1/2" deep and 18-1/8" wide it goes through a 36" doorway with plenty of room, and at 33" high it is far below an 80" door opening.

Does it ship free, and how is it delivered?

Yes, this model ships free. It ships on a pallet by freight truck. A lift gate fee applies to large items like this one if you don't have a loading dock and is calculated at checkout.