Atosa Slim Refrigerated Sandwich Prep Table Stainless Steel 17" MSF17GR-NTCV

The Atosa MSF17GR-NTCV is a one-section, one-door slim refrigerated sandwich prep table for delis, sandwich shops, cafes and cafeterias that need cold ingredient holding in a narrow footprint. It measures 17-3/8" wide, 41-1/8" deep and 36-11/16" high. It has a 3.7 cu. ft. refrigerated base and a pan opening that holds eight 1/6-size pans. A bottom-mounted 1/5 HP compressor running R290 refrigerant and a full electronic controller hold 33°F to 40°F, and the unit plugs into a standard 115 V outlet with a NEMA 5-15P plug, drawing 2.9 A. East Bay Restaurant Supply ships this model with free shipping.

Key features

• 17-3/8" wide cabinet for tight prep lines and end-of-line sandwich stations
• Bottom-mounted, self-contained refrigeration with a 1/5 HP compressor and R290 hydrocarbon refrigerant
• Full electronic controller holds 33°F to 40°F
• Pan opening holds eight 1/6-size pans. Ships with one full-size pan and one 1/3-size pan
• Removable stainless steel pan liner and stainless steel night cover included
• Self-closing door with stay-open feature, recessed handle and magnetic gasket
• Door swing can be reversed in the field
• Two pre-installed epoxy-coated shelves in the 3.7 cu. ft. base
• Stainless steel interior and exterior on pre-installed 2" casters
• cETLus and ETL Sanitation listed

Atosa MSF17GR-NTCV specifications

Brand	Atosa
Model number	MSF17GR-NTCV
Product type	Refrigerated slim sandwich prep table, standard top
Sections	1
Doors	1 solid hinged, self-closing, field reversible
Storage capacity	3.7 cu. ft.
Pan capacity	Eight 1/6-size pans
Pans included	One full-size pan, one 1/3-size pan
Exterior width	17-3/8"
Exterior depth	41-1/8"
Exterior height	36-11/16"
Temperature range	33°F to 40°F
Controller	Full electronic
Refrigeration	Self-contained, bottom mount
Refrigerant	R290 hydrocarbon
Compressor	1/5 HP
Electrical	115 V / 60 Hz / 1 phase, 2.9 A
Plug	NEMA 5-15P
Shelves	2, pre-installed, epoxy-coated
Exterior material	Stainless steel
Interior material	Stainless steel
Pan liner	Removable stainless steel
Night cover	Stainless steel, included
Casters	2", pre-installed
Net weight	180 lb
Shipping weight	214 lb
Certifications	cETLus (conforms to UL 471, certified to CSA C22.2 No. 120), ETL Sanitation
Warranty	3 years parts and labor, 5 years compressor (units shipped on or after July 1, 2026)

Frequently asked questions

What outlet does the Atosa MSF17GR-NTCV need?

It needs a standard grounded 115 V, 60 Hz, single-phase receptacle that accepts its NEMA 5-15P plug (a NEMA 5-15R outlet). The unit draws 2.9 A.

Will it fit through a standard doorway?

Yes. At 17-3/8" wide it passes through a 36" doorway with room to spare when rolled through lengthwise, even though its 41-1/8" depth is wider than the opening. Its 36-11/16" height is well under an 80" door opening.

What temperature does it hold? Is it a refrigerator or a freezer?

It is a refrigerator. It holds 33°F to 40°F, controlled by a full electronic controller. It is not designed to hold frozen product.

How many pans does it hold, and which pans are included?

The pan opening holds eight 1/6-size pans. The unit ships with one full-size pan and one 1/3-size pan, which take up the same opening. Below, the 3.7 cu. ft. base has two epoxy-coated shelves for backup product.

What certifications does it have?

It is cETLus listed for electrical safety in the US and Canada (conforms to UL 471, certified to CSA C22.2 No. 120) and ETL Sanitation listed. The sanitation listing shows the unit meets food equipment sanitation standards, which health inspectors look for in commercial kitchens.

What warranty comes with it?

Units shipped on or after July 1, 2026 carry a 3-year parts and labor warranty plus 2 more years of coverage on the sealed compressor, 5 years in total. After year 3, coverage applies only to the sealed compressor parts. It does not cover the cabinet, paint finish, temperature control, refrigerant, metering device, motor starting equipment, fan assembly or other electrical components. Atosa does not cover damage from alteration, neglect, abuse, misuse, accident, transit, installation, fire or acts of God. It is also not responsible for food spoilage or other consequential losses. Compressor coverage requires R290 service procedures to be followed: drier replaced, micron-level vacuum, and compressor sourced through Atosa. Claims go directly to Atosa with the model number, serial number, proof of purchase and installation date.

How does it differ from the Atosa MSF8301GR and MSF3610GR?

The MSF17GR-NTCV is the narrow option: 17-3/8" wide, bottom-mounted compressor, two shelves and a night cover. The MSF8301GR is a 27-1/2" wide, 30" deep one-door unit with a rear-mounted compressor, a 9-1/4" cutting board, one shelf and pre-installed 6" deep poly pans. The MSF3610GR is a 36-5/16" wide, two-door unit with 8.7 cu. ft. of storage and a 1/7 HP compressor.

Can the door swing be changed?

Yes. The door can be reversed in the field to suit the layout. It is self-closing, stays open when needed and seals with a magnetic gasket.

Does it ship free, and how is it delivered?

Yes, this model ships free. It ships on a pallet by freight truck. A lift gate fee applies to large items like this one if you don't have a loading dock and is calculated at checkout.